Perth
Gutter Guard in Perth
Manufactured in Australia, supplied nationwide
Talk to our team to find out if there's a local installer in your area.
- Manufactured in NSW, not imported finished
- Consistent specification on every roll
- Suits new builds & retrofits alike


Get in touch with our team

CSIRO flammability high index rating

VHB adhesive fixing
Proudly manufactured in Australia with internationally sourced materials
Lake Macquarie / Hunter Valley

Year Gutter Guard warranty
Up to 20 stainless with 3M VHB, up to 15 aluminium. Certified installer required. T&Cs apply

Over 30 Years of Industry Experience

+25 years of HIA membership


Perth
Why Where It's Made Matters
At Leaf Free Gutter Guard, we manufacture rather than import, and gutter guard in Perth arrives with the same specification as everywhere else we supply. That consistency is the point.
Imported mesh varies between shipments in ways that aren't obvious until it's on a roof. Aperture drifts, coating thickness changes, and there's nobody to ask because the people who made it are on the other side of an ocean.
We can answer for every roll because we made it. Call 1300 456 678 with a question and you'll get an answer, not a guess.

Perth
Gutter Guard in Perth
Controlling manufacture means controlling the things that actually determine performance. The aperture is held at 2mm across every material and every width, so debris behaviour doesn't shift between orders.
Coating is applied in two steps on the aluminium range rather than one, which is a process decision we can make because the process is ours. Stainless is 316 grade rather than a cheaper alloy that looks identical on delivery.
When a trade customer needs a non-standard width or tape layout, that's a conversation with the people who'll cut it.

Perth
Residential Gutter Guard in Perth
Fitting mesh at build stage is easier than retrofitting it, simply because the gutters are clean, the surface is new and access is already set up. If a home is going up, it's the right moment to think about it.
Retrofits work perfectly well, they just involve more preparation. The gutters have to be cleared, washed and dried, and older surfaces often need priming before tape will bond properly.
Either way the Gutter Guard is the same. Our residential range covers tile, corrugated and trimdek roofs with the width matched to the gutter.

Perth
Commercial and Strata Gutter Guard in Perth
Water getting into a commercial building is expensive in ways the repair bill doesn't capture. Stock damage, tenant disruption and insurance excess usually outweigh the cost of fixing the gutter that caused it.
Most of those events trace back to a blocked gutter or outlet rather than a failed roof. Keeping the drainage path clear is the cheapest preventative measure available.
We supply Gutter Guard by the roll in three widths, with specification detail available for risk assessments, tender documents and maintenance plans.
Perth
Gutter Guard Fitting in Perth
How long a fit takes depends far more on the gutters than the Gutter Guard. Laying, rolling and trimming a straightforward run moves quickly once preparation is done.
What extends the job is everything before that: clearing a heavily loaded gutter, washing it out, waiting for it to dry and priming a weathered surface. On an older roof that can be most of the day.
Valleys, corners and roof penetrations add time too, since each needs trimming and finishing rather than a straight run of mesh.

Perth
Gutter Cleaning and Repair in Perth
Repairs before Gutter Guard usually fall into three categories. Sealant work at joints and internal corners is the most common, followed by bracket replacement where a run has dropped, then section replacement where rust has gone through.
None of them are difficult while the gutter is open and accessible. All of them are considerably harder once Gutter Guard is bonded over the top.
The sequence is worth respecting: inspect first, repair second, clean and dry third, and only then fit. Skipping straight to the Gutter Guard is what creates problems later.
Gutter Guard for Common Roof Profiles
The Gutter Guard width, material and finishing details should be matched to the roof profile and gutter opening.

Tile roofing
Check valleys, edges and the tile profile before cutting mesh.

Corrugated metal
Prepare a clean, dry strip for the 3M VHB adhesive fixing.

Trimdek
Shape the Gutter Guard to the profile and roll the adhesive evenly.

Commercial
Check wider runs, box gutters, access and Gutter Guard width before ordering.
Getting Started
Start with the roof details, work through the product options and then choose how you want the Gutter Guard fitted.
Tell Us About the Roof
Share the roof profile, gutter width, location and the debris you are dealing with.
Work Through the Product
We help narrow down the Gutter Guard type, width and fitting products to consider.
Choose the Fitting Path
Order for DIY fitting or use a certified installer where one is available. Warranty cover requires fitting by a Leaf Free certified installer.
Frequently Asked Questions
Specification consistency between shipments is the main practical difference, along with who can answer a technical question about a particular batch. The materials themselves can be similar or identical.
New builds are simpler because the gutters are clean and access is already arranged, but retrofitting is entirely normal. The difference is preparation time rather than the result.
Anything affecting the integrity or fall of the gutter, including split seams, failed joints, dropped brackets and rust through the base. Fixing them afterwards means removing mesh to reach the problem.
Made here, answered here. Call 1300 456 678.
Call 1300 456 678


