ACT
Gutter Guard in the ACT
Manufactured in Australia, supplied nationwide
Talk to our team to find out if there's a local installer in your area.
- 316 marine grade stainless steel Gutter Guard
- Designed to meet BAL-40 requirements
- Specification detail for compliance records


Get in touch with our team

CSIRO flammability high index rating

VHB adhesive fixing
Proudly manufactured in Australia with internationally sourced materials
Lake Macquarie / Hunter Valley

Year Gutter Guard warranty
Up to 20 stainless with 3M VHB, up to 15 aluminium. Certified installer required. T&Cs apply

Over 30 Years of Industry Experience

+25 years of HIA membership


ACT
Rated Gutter Guard, Documented Properly
Leaf Free Gutter Guard supplies gutter guard in the ACT to homeowners, builders and facilities managers who need more than a product name when it comes to fire rating and specification.
Our 316 stainless steel and poly coated aluminium Gutter Guard ranges are designed to meet BAL-40, and we can supply the material grade, aperture and rating detail that goes into a compliance file or a building record.
If you need that documented rather than described, ask. Call 1300 456 678.

ACT
Gutter Guard in the ACT
Stainless steel comes in grades, and the difference between them matters far more on a roof than the name suggests. We use 316 rather than a cheaper alloy because it contains molybdenum, which improves resistance to chloride corrosion.
That's what allows it to be specified in marine environments and what keeps it from pitting under sustained exposure. It also doesn't rely on a coating for protection, so there's nothing to chalk, fade or wear through.
It carries the longest warranty in our range at up to 20 years, and it's designed to meet BAL-40.

ACT
Residential Gutter Guard in the ACT
Cold weather adds a problem most gutter discussions skip. Water sitting in a blocked gutter can freeze, and ice expanding in a channel puts loads on brackets and seams that they weren't designed to take.
A gutter that drains properly doesn't hold water long enough for that to happen. Keeping the channel clear is the prevention.
Mesh does it continuously, so the gutter empties after rain instead of holding a pool through a cold night. Our residential range covers tile, corrugated and trimdek profiles.

ACT
Commercial and Strata Gutter Guard in the ACT
Institutional and government buildings usually need a paper trail alongside the work. Product specification, fire rating, warranty terms and installation method all end up in a file somewhere.
We can supply that detail in a usable form rather than leaving a contractor to reconstruct it. Gutter Guard grade, aperture, width, tape configuration and rating are all documented.
Supply runs by the roll in 250mm, 500mm and 1000mm widths, with staged delivery available where a rollout spans several buildings or budget periods.
ACT
Gutter Guard Fitting in the ACT
Preparation is where new and old roofs diverge. New coated steel generally gives adhesive a sound surface after cleaning, since the coating is intact and nothing is breaking down.
Older roofs need the extra step. Weathered coating leaves a chalky layer that comes away under the tape, so priming after cleaning restores something solid to bond to.
The rest of the sequence is identical either way: lay the Gutter Guard, roll it down under firm even pressure along the full run, then finish edges and valleys with saddles and angle trim.

ACT
Gutter Cleaning and Repair in the ACT
Outlets are the constraint on any gutter system. A clean channel feeding a partially blocked outlet still backs up, and the blockage is usually somewhere out of sight in the bend below.
Flushing the downpipes and confirming flow through to the stormwater connection belongs in the preparation, not as an afterthought.
The rest is the standard sequence: clear the run, check for rust, splits and dropped brackets, wash it out and let it dry fully before any adhesive goes down.
Gutter Guard for Common Roof Profiles
The Gutter Guard width, material and finishing details should be matched to the roof profile and gutter opening.

Tile roofing
Check valleys, edges and the tile profile before cutting mesh.

Corrugated metal
Prepare a clean, dry strip for the 3M VHB adhesive fixing.

Trimdek
Shape the Gutter Guard to the profile and roll the adhesive evenly.

Commercial
Check wider runs, box gutters, access and Gutter Guard width before ordering.
Getting Started
Start with the roof details, work through the product options and then choose how you want the Gutter Guard fitted.
Tell Us About the Roof
Share the roof profile, gutter width, location and the debris you are dealing with.
Work Through the Product
We help narrow down the Gutter Guard type, width and fitting products to consider.
Choose the Fitting Path
Order for DIY fitting or use a certified installer where one is available. Warranty cover requires fitting by a Leaf Free certified installer.
Frequently Asked Questions
The alloy includes molybdenum, which significantly improves resistance to corrosion from chlorides and harsh exposure. It's the grade specified in marine environments for that reason.
Water held in a blocked gutter can freeze and expand, placing loads on seams, brackets and joints. A gutter that drains freely doesn't retain water long enough for it to be an issue.
Typically the material grade, mesh aperture, applicable bushfire attack level, warranty period and the installation method used. All of it should come from the manufacturer rather than being estimated.
Rated, documented and made here. Call 1300 456 678.
Call 1300 456 678


