Adelaide
Gutter Guard in Adelaide
Manufactured in Australia, supplied nationwide
Talk to our team to find out if there's a local installer in your area.
- BAL-40 rated stainless & aluminium
- Suits heritage tile & modern metal roofs
- Trade orders direct from the factory


Get in touch with our team

CSIRO flammability high index rating

VHB adhesive fixing
Proudly manufactured in Australia with internationally sourced materials
Lake Macquarie / Hunter Valley

Year Gutter Guard warranty
Up to 20 stainless with 3M VHB, up to 15 aluminium. Certified installer required. T&Cs apply

Over 30 Years of Industry Experience

+25 years of HIA membership


Adelaide
Matching Mesh to Older Homes
At Leaf Free Gutter Guard, we supply gutter guard in Adelaide across a housing mix that includes a lot of older roofs, and older roofs need the specification thought through rather than assumed.
Tile profiles, shallow guttering and weathered surfaces all change what works. So does whether the property sits in a designated bushfire-prone area, which rules out some materials entirely.
Tell us what's on the roof and we'll match a mesh and a width to it. Call 1300 456 678 to talk it through.

Adelaide
Gutter Guard in Adelaide
Where a bushfire attack level applies, the Gutter Guard has to be rated for it. That narrows the choice to 316 stainless steel or poly coated aluminium, both of which are designed to meet BAL-40.
Fibreglass is a good product on the right roof, but it carries no fire rating and shouldn't be specified where one is required. It's worth confirming a property's status before ordering rather than after.
Beyond the rating, the two fire-rated Gutter Guard ranges differ in weight, finish, price and warranty period, which is where the rest of the decision sits.

Adelaide
Residential Gutter Guard in Adelaide
Heritage and older homes bring detail that newer roofs don't. Tile profiles vary considerably, gutters are often shallower, and the way the roof meets the gutter isn't as standardised as it became later.
Mesh has to suit that rather than sit awkwardly across it. Width selection and trim choice do most of the work, keeping the Gutter Guard flat at the lip and finishing cleanly at valleys and corners.
We supply for tile as readily as for corrugated and trimdek, with saddles holding the Gutter Guard at the gutter edge.

Adelaide
Commercial and Strata Gutter Guard in Adelaide
Owners committees work to a decision cycle, and anything needing approval has to survive a meeting. What helps is a proposal with specification attached rather than a quote with a product name on it.
We can provide Gutter Guard grade, aperture, width, fire rating and warranty period in a form that goes straight into a submission.
Supply runs in 250mm, 500mm and 1000mm widths, with tape configured to suit the profile and staged delivery available across multiple buildings.
Adelaide
Gutter Guard Fitting in Adelaide
New and old roofs need different preparation, and assuming otherwise is the most common fitting mistake. A recent coated steel roof is usually sound enough that cleaning alone gives adhesive a good surface.
An older roof frequently isn't. Coating that has chalked leaves a powdery layer, and tape bonded to it is bonded to something already letting go.
Priming after cleaning solves it. The check takes seconds: wipe a cleaned section with a cloth and see whether colour comes off.

Adelaide
Gutter Cleaning and Repair in Adelaide
Fall and outlet capacity decide whether a gutter can clear water at all. A run that sits level, or drops away from the outlet, holds water permanently no matter how clean it is.
Before Gutter Guard is fitted, the fall should be checked along the whole run and brackets adjusted or replaced where it has dropped. Outlets should be flushed and confirmed clear through to the stormwater connection.
Then the usual work: clear the debris, wash the channel, and give it time to dry before any tape is laid.
Gutter Guard for Common Roof Profiles
The Gutter Guard width, material and finishing details should be matched to the roof profile and gutter opening.

Tile roofing
Check valleys, edges and the tile profile before cutting mesh.

Corrugated metal
Prepare a clean, dry strip for the 3M VHB adhesive fixing.

Trimdek
Shape the Gutter Guard to the profile and roll the adhesive evenly.

Commercial
Check wider runs, box gutters, access and Gutter Guard width before ordering.
Getting Started
Start with the roof details, work through the product options and then choose how you want the Gutter Guard fitted.
Tell Us About the Roof
Share the roof profile, gutter width, location and the debris you are dealing with.
Work Through the Product
We help narrow down the Gutter Guard type, width and fitting products to consider.
Choose the Fitting Path
Order for DIY fitting or use a certified installer where one is available. Warranty cover requires fitting by a Leaf Free certified installer.
Frequently Asked Questions
Yes, with the width and trim chosen to suit the tile profile and the way it sits over the gutter. Older roofs typically need more surface preparation than newer ones.
Whether the property sits in a designated bushfire-prone area and what bushfire attack level applies to the site. Local planning authorities hold the mapping that determines it.
A gutter with insufficient or reversed fall holds water regardless of debris, which causes corrosion and overflow. Mesh keeps debris out but doesn't change the way water runs.
Older roof or new, we'll spec it. Call 1300 456 678.
Call 1300 456 678


